Welcome to Dongguan Xinhe Electromechanical!
- All
- Product Management
- News
- Introduction
- Corporate Outlets
- FAQ
- Corporate Video
- Corporate Brochure
News
News center
Contact Us
Headquarter Address: Baihao Industrial Zone, Houjie Town, Dongguan City, Guangdong Province
Tel：+86 769-85923778 85923738
85878200
Fax：+86769-85924507
Website：http://www.dg-xinghe.com
E-mail：cds@dg-xinghe.com
The magnetic powder clutch/brake is malfunctioning.
Published Time：
2013-05-10
Pneumatic expansion shafts, pneumatic expansion shafts/safety chucks, edge tracking devices (side register), magnetic powder brakes and clutches, material feeding and unwinding systems, tension control devices and other related accessories for printing, laminating, slitting, rewinding, coating, gluing, extrusion, and film casting machinery.
1. Magnetic powder filling between the two sets of units scattered to one side due to transportation or prolonged placement, and the device was stuck due to lack of excitation before starting.
2. Due to low manufacturing precision of the product and insufficient concentricity of the rotor, resulting in uneven or stuck output torque.
3. Caused by excessive magnetic powder filling during production.
4. Caused by using inferior magnetic powder.
For the above situations, it is recommended:
1. Before formal operation or after device movement, uniform operation must be performed before formal operation. This can produce smooth torque. The uniform operation method is as follows:
In the absence of excitation, the drive side rotates at the highest possible speed (below 1800 rpm) for about 1 minute, then set the excitation current to 1/4-1/5 of the rated value. While rotating the drive side, intermittently excite for about 20 times with 5 seconds on and 10 seconds off.
2. When purchasing magnetic powder clutches/brakes, it is best to choose products with guaranteed quality.
Advantages of magnetic powder brakes:
1. CNC precision manufacturing, high precision, fine processing, good linearity, superior performance.
2. High magnetic powder purity, no black carbon powder added, stable performance, long life.
3. Aluminum alloy construction, excellent heat dissipation performance, good demagnetization performance, fast response speed.
4. Stable operation, no vibration, impact, or noise during start-up, operation, and braking.
Air expanding shaft, air expanding shaft/safety chuck, edge tracker (opposite side machine) device, magnetic powder brake and clutch, feeding and unloading linkage system, tension control device and other related printing, bonding, slitting, rewinding, coating, gluing, extrusion, lamination and other industrial machinery accessories.
Headquarter Address: Baihao Industrial Zone, Houjie Town, Dongguan City, Guangdong Province
Tel：+86769-85923778 85923738 85878200
Fax：+86769-85924507
Website：http://www.dg-xinghe.com
E-mail：cds@dg-xinghe.com
Copyright © 2025 Dongguan Houjie Xinhe Electromechanical Business Department ALL Rights Reserve.