2012-10-30

Introduction to the corrector

Dongguan Xinhe Electromechanical specializes in the production of edge guiding machines, gasoline-powered edge guiding machines, correcting machines, photoelectric correcting machines, ultrasonic correcting devices, magnetic powder clutches, magnetic powder brakes, air expanding shafts, and other transmission components for packaging and printing machinery. I. Brief Description of Correcting Machine: 1. Brief Description of Correcting Machine: The correcting machine is a device used for correcting the material in heat sealing and cutting bagging machines and printing machine roll materials; the correcting machine is based on the signal transmitted by the photoelectric sensor to the correcting controller, and then the controller outputs a correcting signal to the correcting machine stepper motor, and the stepper motor drives the bottom screw of the machine to move according to the control signal, thereby achieving the correcting effect! II. Classification of Correcting Machines: (1) According to the correcting method

2012-10-30

Photoelectric correction device

Photoelectric deviation controller Photoelectric deviation is mainly used in the transverse deviation control of roll materials, and can correct various roll materials: such as roll paper film, metal foil, non-woven fabric, woven fabric and other roll materials. The controller can select edge following or line following according to different correction materials, and freely select single/double photoelectric eye detection to meet the needs of various materials.

2012-10-30

The use of edge machines/correctors

The most troublesome issue in the production line of roll and sheet materials is that due to the high speed, tension, uneven thickness, and various mechanical damages during the long and fast production process, the materials are prone to lateral movement and unidirectional deviation on the production line, making it difficult for the middle processing operations to cooperate. Or the feeding and receiving operations at the front and rear ends are uneven, resulting in a lot of material loss and difficulties in subsequent processing.

2010-07-10

China has the most competitive manufacturing capabilities globally

Deloitte's Global Manufacturing Group and the U.S. Competitiveness Council recently jointly released the "2010 Global Manufacturing Competitiveness Index." The report shows that acquiring talented individuals with innovative capabilities is the key for manufacturing companies to enhance their global competitiveness, surpassing traditional factors such as power, raw materials, and energy in importance. With relatively low costs and abundant support from highly skilled personnel, China's manufacturing sector is considered to have the strongest competitiveness both currently and in the next five years.

2010-07-10

The central bank will raise the reserve requirement ratio for financial institutions' RMB deposits by 0.5 percentage points.

The People's Bank of China (PBOC) announced on May 10, 2010, a 0.5 percentage point increase in the reserve requirement ratio (RRR) for Chinese yuan (RMB) deposits at financial institutions. Rural credit cooperatives and village banks are exempt from this increase.

2010-07-10

In the first half of the year, China continued to lead the global auto market

SAIC-GM-Wuling, which has continuously set sales records for Chinese automakers, announced its sales data for the first half of the year on July 8. Following a surge in sales last year, sales continued to grow by 30% year-on-year.