Welcome to Dongguan Xinhe Electromechanical!
- All
- Product Management
- News
- Introduction
- Corporate Outlets
- FAQ
- Corporate Video
- Corporate Brochure
News
News center
Contact Us
Headquarter Address: Baihao Industrial Zone, Houjie Town, Dongguan City, Guangdong Province
Tel：+86 769-85923778 85923738
85878200
Fax：+86769-85924507
Website：http://www.dg-xinghe.com
E-mail：cds@dg-xinghe.com
The HY-10/12 servo correction controller is unusable
Published Time：
2019-11-27
Dongguan Xinhe Electromechanical specializes in the production of edge guiding machines, gasoline-powered edge guiding machines, deviation correctors, photoelectric deviation correctors, ultrasonic deviation correctors, magnetic powder clutches, magnetic powder brakes, air expanding shafts, and other transmission components for packaging and printing machinery. Photoelectric deviation correction is mainly used in the transverse deviation control of roll materials. It can correct various roll materials such as paper rolls, films, metal foils, non-woven fabrics, and woven fabrics. The controller can select edge following or line following methods according to different materials and freely select single/dual photoelectric eye detection to meet the needs of various materials. DS-620 photoelectric deviation controller and ...
Reasons why the HY-12/10 correction machine cannot correct in automatic mode
1. The correction machine has manual and automatic modes. Generally, after setting the parameters, click the automatic mode, put on the roll material, and it can automatically correct;
2. However, if the automatic mode cannot correct, there may be these reasons: Check if the sensor is connected correctly;
3. Check the sensor type selection on the correction machine operating system; there are ultrasonic, photoelectric, and CCD options;
4. Check whether the polarity selection of the correction machine is correct. The simplest method is: When the polarity is positive, it cannot correct normally, so choose the polarity to be negative; vice versa;
5. If using a PS-400 photoelectric sensor, sensor calibration is required.
Headquarter Address: Baihao Industrial Zone, Houjie Town, Dongguan City, Guangdong Province
Tel：+86769-85923778 85923738 85878200
Fax：+86769-85924507
Website：http://www.dg-xinghe.com
E-mail：cds@dg-xinghe.com
Copyright © 2025 Dongguan Houjie Xinhe Electromechanical Business Department ALL Rights Reserve.